My home has these on all the basement windows. As a result, there’s a significant hazard in case of fire. From the pictures, are these just held in place by
Switch no longer controls outlet
I replaced a switched outlet together with a switch, but now the outlet has permanent power no matter what position the switch is in. When I was replacing this single
Switch no longer controls outlet
I replaced a switched outlet together with a switch, but now the outlet has permanent power no matter what position the switch is in. When I was replacing this single
Switch no longer controls outlet
I replaced a switched outlet together with a switch, but now the outlet has permanent power no matter what position the switch is in. When I was replacing this single
Outlet one hot wire, one not
I have two black (hot) and two white (neutral) and a ground. One black is hot with braker on and the other is not. What is the likely cause?
Diagram for wiring switches and a light
I have a switch that controls the room light and all the outlets. I would like to make the outlets always hot. The source of the power is behind the
Replacing Ceiling Fan with Light Fixture – No Wall Switch
I would like to replace my ceiling fan with a standard light fixture, however, there is not a wall switch. What are my options if I do not want to
How to wire multiple 3-way switches in one box?
I want to put two 3-way switches in the same box. I’m uncertain what splices I have to make, but I have an educated guess. Rather than explaining it in
Is AFCI required for detached workshop subpanel?
As I read the 2014 NEC 210.12 AFCI protection is only required for a "dwelling unit", which would not include a detached workshop. Is that interpretation correct?
Can sunpanel be mounted to horizontal 2×4?
I read that subpanels should be mounted to a 3/4" backer board or secured directly to a stud. Can I nail two 2x4s horizontally between two studs and secure the
